CARDBOARD TUBE RECUTTER FOR CORES MODEL "TTL".
Minimum inside diameter of tube 50 mm. – maximum 152 mm
Maximum thickness 20 mm.
Maximum length of mother tube 2000 mm up to 3000 mm on demand
Minimum recutted tube length mm.10 – maximum 1600
The knife at the opposite side of the gear box is motorized and by a lever pushed manually cuts the tube without any dust as it is a knife without teeth (not saw cut ). To determinate the length of the recutted tube the operator must position the register; this operation is very easy because a scale metre is fitted over the target register . The operating cycle is : the operator inserts the mother tube over the cutting shaft , then pushes the tube against the register previously positioned and pushing down the lever with the knife and the 2 electric start buttons with both hands makes the cut. The recutted piece falls down and the operator may start a new cutting cycle.

(Back..)